Share this page
Ancon Head Restraints provide the necessary restraint to the top of masonry walls.
Product code : 83AFHR
Product code : 83AIHR
Flat plain-ended tie for use with 21/18 Omega Channel.
Product code : 83APP21
Standard plain end frame cramp.
Product code : 83APPB
Standard plain end / safety end wall tie.
Product code : 83APPS
Plain ended frame cramp.
Product code : 83APPV
Sliding Anchors have stems which fit within the cavity and accept ties that slide to accommodate vertical movement.
Product code : 83ASAH
Safety ended tie coming with a 'v' drip to suit 21/18 Omega channel.
Product code : 83ASD21
Safety ended tie coming with a 'v' drip to suit 25/14 channel.
Product code : 83ASD25
Frame cramps are an ideal solution where a restraint is required between masonry and in-situ structures.
Product code : 83ASDB
Product code : 83ASDV
A safety ended flat tie with a half twist.
Product code : 83ASHX
A bespoke angle section for use with notched wall ties.
Product code : 83ASPAB
Product code : 83ASPB
Product code : 83ASPV
A safety ended tie for use with Ancon 21/18 Omega channel.
Product code : 83ASP21
One-way safety ended ties for use with sliding anchors.
Product code : 83ASPI
3mm thick heavy duty flat tie suitable for collar joint construction.
Product code : 83ASPSC
Heavy duty flat tie.
Product code : 83ASPS
A cost-effective Heavy Duty multi drip safety tie.
Product code : 83ASFST1
Staifix HRT4 is available for cavities from 50mm to 150mm.
Product code : 83ASFHRT4
Staifix RT2 is a general purpose tie suitable for cavities from 50mm to 150mm.
Product code : 83ASFRT2
Timber Frame Tie is available in three lengths to suit 50mm, 75mm and 100mm cavities.
Product code : 83ASFSTF
This system includes all necessary fixings to join a single skin of masonry.
Product code : 83ASFU
A composite general purpose masonry wall tie.
Product code : 83ASFTEPBF2
A composite light duty masonry wall tie.
Product code : 83ASFTEPBF4
Low thermal conductivity wall ties, for tying a masonry outer leaf to an in-situ structure.
Product code : 83ASFTEPLO
Insulation clip suitable for use with the Teplo Tie range.
Product code : 83ASFTEPC
A two-part cavity wall ties for use in cavities over 150mm.
Product code : 83A2P
25/14 Channel System is designed to tie brickwork to steel columns or concrete structures.
Product code : 83JTTCHT
Heavy duty cavity wall tie.
Product code : 83JTT1
General purpose cavity wall tie.
Product code : 83JTT2
Basic cavity wall tie.
Product code : 83JTT3
Light duty cavity wall tie.
Product code : 83JTT4
For the construction of collar jointed walls.
Product code : 83JTTCJS
Plastic debonding sleeve to be used in conjunction with the Tecties Safety plain end or safety plain safety movement ties.
Product code : 83JTTDS
Designed to restrain the top of the inner leaf of cavity walls.
Product code : 83JTTF
Designed to restrain the top of the inner leaf of cavity walls and allows vertical movement between the inner leaf and the structure.
Product code : 83JTTIH
Plastic retaining disk to hold back insulation in conjunction with a wall tie.
Product code : 83JTTID1
Designed to restrain masonry to vertical structures.
Product code : 83JTTSCT
Stainless steel frame cramp.
Product code : 83JTTSFC
Stainless steel frame cramp with v-drip.
Product code : 83JTTSFCV
Designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction.
Product code : 83JTTSPB
Product code : 83JTTSPE
Product code : 83JTTSPS
For timber frame structures up to 4 storeys / 15m high.
Product code : 83JTTTF
Designed for cavity widths exceeding 150mm where longer tie lengths are required.
Product code : 83JTTTP
Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.
Nationwide Delivery