Share this page
Bio-enhanced PIR, partial fill wall insulation system. The system incorporates robust facings, engineered jointing details and pre-formed corners.
Product code : 28HTXT
An engineered system providing added resilience against increases in wind-driven rain resulting from climate change.
Product code : 28HQFCT
A high performance composite board of enhanced PIR for full fill cavity wall applications.
Product code : 28HF
Bio-enhanced, superior performance PIR insulation suitable for pitched roof, solid and suspended floor applications.
Product code : 24XEE
Partial Fill cavity insulation for traditional masonry walls, achieves excellent U-Values whilst maintaining a residual cavity.
Product code : 28HJ
Safe-R Framing Board SR/FB is designed for use with steel or timber frame applications up to 18m in height.
Product code : 36IA
SR/PR on sloped roofs provides the most efficient U-Values with minimal intrusion into valuable living space.
Product code : 25YD
SR/RS Rainscreen Board provides ultimate thermal performances in rainscreen applications.
Product code : 25YE
Provides effective thermal and fire performance solutions in structural ceiling applications.
Product code : 36IB
Product code : 36IC
A superior performance insulation with low emissivity aluminium facings both sides, delivering excellent U-Values in floors.
Product code : 24XA
FR/ALU foil faced roof boards are suitable for use below single ply mechanically fixed roof membranes.
Product code : 25YA
High performance insulation for Partially Bonded, Torched-on, Built-up Bituminous Felt Systems.
Product code : 25YB
Insulation for Single Ply Fully Adhered / Partially Bonded Built-Up Felt Systems
Product code : 25YC
Thermal Ply High Performance PIR and Plywood Composite for Flat Roofs.
Product code : 50L
Used in traditional masonry walls, offering the highest thermal standards whilst maintaining a residual cavity.
Product code : 28HO
Insulation for ground supported & suspended floors.
Product code : 24XC
Tapered Insulation for Mechanically Fixed, Single Ply Waterproofing Systems.
Product code : 25YF
Product code : 28HN
Thin-R Pitched Roof XT/PR-UF on sloped roofs provides the most efficient U-values with minimal intrusion into valuable living space.
Product code : 25YJ
An insulated panel with a composite kraft facing bonded to 12.5mm tapered edge plasterboard for internal applications
Product code : 48UA
An insulated panel with a composite foil facing bonded to T/E plasterboard for internal walls, sloped roofs and ceilings.
Product code : 48UB
A partial fill wall insulation system incorporating robust facings, engineered jointing details and performed corners.
Product code : 28HK
XO/UF superior performance PIR offers excellent insulation performance with a thermal conductivity of 0.021 W/mK.
Product code : 24XB
Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.
Nationwide Delivery