Share this page
Intumescent Acoustic Sealant is designed to be used to seal linear gaps in horizontal and vertical constructions.
Product code : 35PCINTU
Acoustic Profile Fillers are designed to fit into the corrugations of perforated decks.
Product code : 35PBCTP
Used to form penetration seals where small cables, pipes or conduits penetrate walls.
Product code : 35PDCPATCH
A full fill cavity fire barrier manufactured from a 100mm thick low density stone wool product for use in masonry facades.
Product code : 35PACCFB
A full fill cavity barrier that can be used vertically and horizontally between the facade and the inner structure of a building.
Product code : 35PACCFS
Used to firestop mechanical, electrical and plumbing services when they pass through fire rated walls.
Product code : 35PDCFP
Firebreak Service Transits allow cabling to be removed and replaced whilst keeping the integrity of existing fire seals.
Product code : 35PDRFT
Firestop Compound is used to provide a fire seal around service penetrations in masonry walls and floors.
Product code : 35PDFIREC
High Expansion Intumescent Sealant is used to seal around services to reinstate the fire performance of floors and walls.
Product code : 35PCINTH
Used to replace the insulation on plastic and metal pipes where they pass through walls and floors.
Product code : 35PESL
Use as a fire stopping system where steel trunking and cable trays penetrate a masonry, concrete or block fire resisting wall.
Product code : 35PDCIPI
Designed and tested to provide a fire-resistant seal in flexible walls, rigid walls, rigid floors, and PFC Corofil Coated panels.
Product code : 35PECIPC
Used to reinstate the fire resistance performance of wall and floor constructions penetrated by combustible pipe services.
Product code : 35PECIPW
A fire stopping block to fit the trapezoidal profile of composite profile decking.
Product code : 35PBCLGB
A stone wool strip installed in rigid wall and rigid floor constructions to maintain the fire resistance of the separating element.
Product code : 35PBCLGS
An open state cavity barrier for use in ventilated facade systems designed to close off air gaps of 25mm.
Product code : 35PACOSB25
An open state cavity barrier for use in ventilated facade systems designed to close off air gaps of 44mm.
Product code : 35PACOSB44
Designed for use with the PFC Corofil Open State Barrier COSB 25 (1024) in ventilated facade systems.
Product code : 35PACOSBI
Putty Pads protect the electrical switches and sockets with plastic or metal back boxes that penetrate a partition wall
Product code : 35PFPUTP
Suitable for use in the Coated Panel System, flexible walls and concrete floors. Designed to seal penetrations containing pipes.
Product code : 35PEIUFW
Vent Duct Sleeves are a closure device installed around plastic vent ducts through non load bearing wall constructions.
Product code : 35YVDFS
FF102/25 Ventilated Cavity Barrier is for horizontal cavities.
Product code : 35YVFB10203
FF102/50 Open State Cavity Barrier is for horizontal cavities.
Product code : 35YVFB10207
Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.
Nationwide Delivery