Share this page
Self-adhesive, cross-laminated HDPE waterproofing membrane with enhanced bonding characteristics.
Product code : 82ABTH4
Advanced, self-adhesive membrane with unique HDPE composite film that provides superior physical properties for water and vapour proof application in sub-structures.
Product code : 82ABTH8
A solvent based bituminous primer used to prepare substrates where BITUTHENE GP membranes are to be applied.
Product code : 82ABTHPB
A rubber-based primer in solvent, specially formulated to provide good initial adhesion.
Product code : 82ABTHPS
A combination of a high density polyethylene film and a self-adhesive rubber/bitumen compound.
Product code : 82ABTHG
A flexible self adhesive tape that is fully compatible with GCP waterproofing membranes.
Product code : 82ABTS4
Loose laid sheet membrane system designed to protect buildings against the ingress of methane, radon, carbon dioxide, hydrocarbon vapours and water vapour.
Product code : 82AGGM
Part of the GGM 400 gas membrane system, a butyl tape for sealing laps.
Product code : 82AGGM4
Self-adhesive roofing underlayment for premium roof leak protection on sloping timber boarded roofs.
Product code : 82AI
An advanced, self-adhesive PREPRUFE Membrane for protection of below ground structures
Product code : 82APP8
Specifically designed for waterproofing and the protection of concrete slabs and below ground concrete walls poured in confined space conditions.
Product code : 82APP13
Reinforced pressure sensitive tape incorporating PREPRUFE coating for continuous concrete adhesion at taped edges and details.
Product code : 82APPT
Single sided PVC tape in 75mm x 33m rolls.
Product code : 83IHLJT3
A self-adhesive modified bitumen sheet material, that can be used as a fully bonded damp proofing membrane and as Type A Barrier Membrane.
Product code : 83IHL20
Torch applied bitumen sheet material that can be used as a fully bonded damp proofing membrane and as Type A Barrier Membrane.
Product code : 83IHL3
A double-sided bitumen/rubber self-adhesive tape for use with RIW Protection Board or Double Drain.
Product code : 82CAT
A self-adhesive tape with excellent adhesion properties that will adhere to most common surfaces.
Product code : 82CCDO
Used as internal cavity drainage membrane system, to collect water entering the structure.
Product code : 82CCDR0
Product code : 82CCDR2
Used to provide a seal between ‘flanged’ overlaps of RIW Cavity Drain R7.
Product code : 82CCDST
Primer for the sealing of horizontal concrete substrates prior to the application of RIW Cementseal or Cementflex.
Product code : 82CCSEALP
A two-pack solvent free black liquid modified epoxide surface conditioner for use in conjunction with RIW Flexiseal Pro.
Product code : 82CFSPP
A cold applied, high density polyethylene film typically used to provide a water and water vapour barrier in all forms of construction.
Product code : 82CSS226
A bitumen solution primer for use with RIW Sheetseal 226.
Product code : 82CSSP
A bentonite clay sheet waterproofing composite for use on below ground vertical and horizontal structural foundation surfaces.
Product code : 82CSTR
A single-sided adhesive tape, consists of a butyl rubber adhesive that is covered with a release liner.
Product code : 82JBSSS
Modified natural sodium bentonite granules that form a dense waterproof paste when wetted.
Product code : 82JBSG25
A self healing waterproofing membrane that is resistant to contaminated soils, forming an automatic mechanical bond to freshly poured concrete.
Product code : 82JBSM
A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives.
Product code : 82JBSP15
A galvanised steel bonding strip with 5mm holes at 15mm centres in a solid plastic holder.
Product code : 82JBST
A double-sided, self-adhesive tape based on a butyl rubber adhesive.
Product code : 82JSPET0
A self‐adhesive tape, based on a polyacrylate adhesive on a yellow carrier film coated with the SikaProof A fully bonded system.
Product code : 82JSPT
A black elastomeric bituminous priming solution for use with below ground waterproofing membranes.
Product code : 82VHPT
A robust co-extruded waterproofing membrane, coloured grey on the upper surface and black on the reverse.
Product code : 82VPA
A modified bitumen rubber membrane with a self adhesive coating.
Product code : 82VSAT
A high density polyethylene (HDPE) robust studded wall membrane.
Product code : 82VV08W
A high density polyethylene (HDPE) profiled sheet that is part of the Visqueen Cavity Drain System.
Product code : 82VV20
Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.
Nationwide Delivery