Share this page
Knauf dry screed panels backed with wood-fibre for enhanced acoustic performance.
Product code : 59SDFS
Ideal for use in either single or double layers under Knauf flooring panels to improve impact sound insulation.
Product code : 59SARP
GIFAfloor Acoustic Isolating Strip is for use with Knauf Linear Bearing Systems.
Product code : 59SFLAI
A purpose made self-adhesive strip designed to isolate the floor deck from the top of the joist.
Product code : 53WARIS
A resilient metal section which is fixed to floors and partitions to reduce direct sound transmission.
Product code : 53WNRB
The board is an all round performer, ideally suited to schools, hospitals and other large commercial projects.
Product code : 53SU
Offers enhanced levels of sound performance and a greater density, ideal for applications that require 10kg/m2 density.
Product code : 53SH
Suitable for use as a cladding component in partitions and lining systems. The boards also offer enhanced acoustic performance
Product code : 53SS
Glass fibre tape with an alkaline-resistant coating used to reinforce joints.
Product code : 53WQTP
White pre-mixed water-based emulsion primer.
Product code : 53WQEEP
Portland cement-based, synthetic resin-enhanced basecoat.
Product code : 53WQEBC
Specially developed screws for fixing Knauf AQUAPANEL® Cement Board Outdoor to heavy gauge steel profiles.
Product code : 53WQEMS
Decorative plaster with a maximum grain size of 2mm.
Product code : 53WQEMF
200mm meshed glass fabric reinforcing tape.
Product code : 53WQERT
40mm self-drilling stainless steel screws for fixing Knauf AQUAPANEL® Cement Board Outdoor to aluminium substructures.
Product code : 53WQESB
40mm stainless steel screws specially developed for fixing Knauf AQUAPANEL® Cement Board Outdoor to timber substructures.
Product code : 53WQESN
Cement-based material for filling joints.
Product code : 53WQJFG
Galvanised solid steel flat strap used for lateral frame bracing.
Product code : 53WFFB
Part of a range of fixings for use with the Knauf SFS system.
Product code : 53WHSCL
Specialist screws for fixing Knauf Windliner boards to the solid steel frame.
Product code : 53WFWI
Airtight and weather resistant tape for sealing joints between Windliner boards.
Product code : 53WBWT
Knauf Brio screws are used to firmly hold Knauf Brio or Knauf Brio WF Panels together to ensure the adhesive bonds effectively.
Product code : 59SBS
Knauf Flooring Edge Strip is a mineral wool perimeter strip for use with Knauf Brio and Knauf GIFAfloor systems.
Product code : 59SES
Knauf GIFAfloor Panel Edging Foam Tape is an acoustic tape for GIFAfloor systems.
Product code : 59SFLP
Knauf GIFAbond Blue Flooring Joint Adhesive is for use with tongue and groove systems.
Product code : 59SGBB1
Knauf dry screed panels are high quality interlocking flooring systems using gypsum fibreboard technology.
Product code : 59SDFSFHB
Knauf Brio floor panels form a high quality interlocking dry screed flooring system using gypsum fibreboard technology.
Product code : 59SDFSB
Knauf Schnellgrund Floor Primer is a quick-drying primer to be applied to all Knauf flooring panels prior to surface finishing.
Product code : 59SSFP
Galvanised lightweight steel section for use in non-load bearing Knauf partition systems.
Product code : 53WMCA
Knauf Angle Sections are galvanised mid steel angles for use with partitions, column and beam encasements and suspended ceilings.
Product code : 53WNAS
Galvanised lightweight steel section for use in Knauf wall lining systems and Knauf C-Form Ceiling Systems.
Product code : 53WWCC
Metal connector, used to join two sections of Knauf C Channel in Knauf C-Form Ceiling_Systems
Product code : 53WWCCC
Knauf C Studs are a galvanised lightweight steel section for use in non-load bearing Knauf partition systems.
Product code : 53WMCS
The Knauf Channel Intersection Connector locates primary and secondary channels.
Product code : 53WWCIC
Used to provide fixing for horizontal Knauf Core Board joins to ensure fire protection of the Knauf Shaft Wall system
Product code : 53W
The Knauf CT Stud is a unique galvanised steel section used in the Knauf Shaftwall System.
Product code : 53WL
A galvanised steel section for use as an optional head track where increased deflection is expected.
Product code : 53WEUD
An aluminium section used to bridge gaps left for expansion and contraction in drywall partitions.
Product code : 53WAMC
Offers additional rigidity over the flat fixing plate, for use with partitions and wall linings.
Product code : 53WNFC
Knauf Fixing Clips offer a secure connection of channel sections.
Product code : 53WNFX
Used as part of a deflection head as well as to improve rigidity or for the horizontal board joints where required.
Product code : 53WNFF
Galvanised lightweight steel sections for use in non-load-bearing Knauf partition and wall lining systems.
Product code : 53WG
Used as head and floor track and perimeter framing section of the Knauf Shaft wall system.
Product code : 53WJ
Knauf Staggered Stud Clips are used to locate Knauf I studs in the Knauf Silent Spacesaver Partition Systems.
Product code : 53WGS
A galvanised steel section for use as the standard head and floor track, suitable for use in Knauf partitions and wall linings.
Product code : 53WEUC
Locates Knauf C Channel to the background support, for use in Knauf Wall Liner and C Form ceiling systems.
Product code : 53WWUB
Knauf AQUAPANEL Cement Board Outdoor offers a high quality and economical alternative to traditional methods of construction, such as brick and block.
Product code : 53SAPE
A lightweight cement board suitable for interior ceilings in wet/humid areas and some exterior soffits.
Product code : 53SAPSL
Knauf Windliner is a gypsum-based external sheathing board.
Product code : 53SDWI
Pre-mixed synthetic dispersion for priming Knauf AQUAPANEL® Cement Board Indoor after jointing and filling.
Product code : 53WQIP
Ready-mixed water-resistant skim coat for use over Knauf AQUAPANEL® Interior and Knauf AQUAPANEL® Ceiling systems.
Product code : 53WQISK
Decorative plaster moulding with a paper face for direct application of paint finishes.
Product code : 53WCOV
Gypsum-based adhesive to affix Knauf Cove.
Product code : 53WCCA
A rapid curing, water based acrylic expanding fire resistant mastic used for linear joint sealing.
Product code : 53WAFB
A multi-purpose gypsum-based adhesive used with Knauf Metal Furring Channel, plasterboards and insulating laminates.
Product code : 53WABC
Wallboard Primer is a surface treatment for plasterboard joints to ensure a professional finish.
Product code : 53WAWP
A fleece-lined plasterboard which can provide up to two hours fire protection in structural steel encasement.
Product code : 53SEFB
A gypsum-based powder that is mixed with water to form a pliable joint filler.
Product code : 53WBFB
A fibre-glass tape used on all joints in Knauf Frameless Encasement system.
Product code : 53WBGF
Fixing for Knauf Frameless Encasement system.
Product code : 53WBHMF
A non-combustible rock mineral wool slab, for use in the fire protection of structural steel work and steel cased mezzanine column systems.
Product code : 35WT
Knauf Core Board is a purpose designed plasterboard for use in conjunction with the Knauf Shaft Wall system.
Product code : 53SC
Knauf Fire Panel is a fire resistant plasterboard suitable for use as a cladding component in partitions and lining systems.
Product code : 53SF
Danotile is a high performance hygiene ceiling tile, suitable for rooms with high cleaning and infection control requirements.
Product code : 56CJCP106
Offers good thermal performance and is ideal for use in refurbishment and new build applications.
Product code : 49N
Galvanised steel main channel section for the Knauf MF Ceiling system to which the Knauf Plasterboard is fixed.
Product code : 53WWMFC
Secures the Knauf MF Ceiling Channel to the Knauf MF Primary Support Channel
Product code : 53WWMFCC
Nut and bolt for fixing strap hanger to the soffit cleat.
Product code : 53WWN
Galvanised steel section to be used around the perimeter of Knauf MF Ceiling systems.
Product code : 53WWMFPC
Galvanised steel section to be used as the main cross-section and hanger support section of the Knauf MF Ceiling systems.
Product code : 53WWMFPSC
Cleat to connect ceiling system to the structural soffit of the building.
Product code : 53WWSC
Suspension strap to support Knauf C-Form and Knauf MF Ceiling systems.
Product code : 53WWSH
Knauf Moisture Panel offers an improved moisture resistance, suitable for use in kitchens, bathrooms and toilets.
Product code : 53SM
A polymer-based product designed to provide a mechanical key to backgrounds which are smooth or have limited suction.
Product code : 53WKBK
Knauf Airless Finish is a highly efficient spray applied alternative to traditional plaster for finishing walls and ceilings.
Product code : 53WDRMAIF
Ready mixed lightweight patching plaster for small and large repairs including cracks in walls and ceilings.
Product code : 53WDRMEP
ProRoll Light is a ready mixed roller applied plaster used as a superior finish onto plasterboard backgrounds
Product code : 53WDPRL
ProRoll Max is a ready mixed roller applied plaster used as a superior finish onto plasterboard backgrounds
Product code : 53WDPRM
Corrosion-protected screws for fixing Knauf AQUAPANEL® to light gauge steel profiles.
Product code : 53WQMS
Self-tapping black phosphate screws with countersunk Ph2 heads for fixing plasterboards to metal and timber framing.
Product code : 53WFCS
Designed to fix Knauf Performance Plus directly to metal and timber structures.
Product code : 53WFPPC
Self-drilling black phosphate screws with countersunk Ph2 heads for fixing plasterboards to metal and timber framing.
Product code : 53WFDSJ
Product code : 53WFDSS
Self-tapping black phosphate coarse threaded wood screws with countersunk Ph2 heads for fixing plasterboard to timber frames.
Product code : 53WFSW
Product code : 53WFPP
Zinc-coated self-drilling low profile screws with Ph2 heads for metal-to-metal fixing.
Product code : 53WFWHJ
Black phosphate low profile screws with Ph2 head for metal to metal fixing.
Product code : 53WFWHS
A tough, impact-resistant glass-fibre reinforced cement tile backer board for use in wet and humid areas.
Product code : 53SAPIN
Knauf Plank is used as a key component in many partition and floor systems where it acts as an acoustic mass layer.
Product code : 53SP
Wallboard is a standard plasterboard, ideal for use as a cladding component in a majority of partitions and lining systems.
Product code : 53SW
Galvanised solid metal stud available in different sizes and gauges.
Product code : 53WHSS
Galvanised solid steel U section used as the standard head track for Knauf Solid SFS systems.
Product code : 53WHSUT
Galvanised slotted steel deep U section for use as the standard deflection head track for Knauf SFS systems.
Product code : 53WHSUDS
For use at the head and base of SFS panels in Knauf SFS Systems.
Product code : 53WHSZB
A component of the Knauf SFS System.
Product code : 53WHSAS
Hex head framing screws for structural connections such as frame brace.
Product code : 53WFSFSH
Low profile frame stitching screws.
Product code : 53WFSFSL
Cement-bound material for skim coating.
Product code : 53WQJFs
A multi-purpose self adhesive tape, used to reinforce joints and is suitable for plasterboard patch repairs.
Product code : 53WACFT
Installed with a unique paper tape and nose coating that resists scuffing and fuzzing from knives and sanding.
Product code : 53WRCBB1EB3
Pre-formed galvanised steel beads that provide protection to external corners of drywall partitions.
Product code : 53WADAB
Used to provide protection for exposed plasterboard edges, suitable for 12.5mm thick plasterboard.
Product code : 53WADEB
Knauf Fibre Tape is a multi-purpose self adhesive tape used to reinforce joints and to patch repairs to plasterboard.
Product code : 53WBBF
An easy-to-sand jointing compound for bedding tapes and finishing joints in drywall partitions and ceilings.
Product code : 53WRFF
A ready-mixed jointing compound for bedding tapes and finishing joints in drywall partitions and ceilings.
Product code : 53WRFFL
A fast-setting multi-purpose gypsum-based compound for bedding tapes and beads, as well as finishing. For hand application.
Product code : 53WBFFP3
Product code : 53WBFFP6
Knauf Joint Cement Premium is for finishing joints by hand, giving an exceptional finish that requires minimal sanding.
Product code : 53WBAJCP
A fast-setting gypsum compound for bedding joints by hand application.
Product code : 53WBAJFP
A Flexible Metal Tape for varying angles.
Product code : 53WRFMT
A white tape for reinforcing joints, creating the strongest joints, especially ideal on ceilings.
Product code : 53WBAJT
Used for wall applications to bond individual AQUAPANEL® Indoor boards.
Product code : 53WQJA29
Steel section for use where increased acoustic performance is required.
Product code : 53WMMW
Accessing our website tells us you are happy to receive all our cookies. However you can change your cookie settings at any time. Find out more.
Nationwide Delivery